PFlow Industries D116 User Manual

Revision: 3.0.3
Press key
Press Ent to start Manual Totalizer, then press Ent to
end Manual Totalizer, press Ent to input Standard
Totalizer to get the final K factor. Complete the
calibration with pressing Ent to store.
Press key
Input Code 1234 to complete Reset Zero.
Press key
Display System Error Codes.
2.2 Examples
For example, measuring the diameter of 2
19
Pipe Material is carbon steel, No Liner,
can be operated as follows
Step1. Pipe outside diameter:
Press
keys to enter Window
M11, and enter the pipe outside diameter, and
then press the key to confirm.
Step2. Pipe wall thickness
Press the
key to enter Window
M12, and enter the pipe wall thickness, and
press the key to confirm.
Step3. Pipe Material
Press the
keys to enter Window
M14, press the key, press
the
key to select Pipe
Material, and press th
key to confirm.
Step4. Transducer type
(The transmitter is available for various
transducer types.)
Press the
key to enter Window
M23,press the
key,move the
key to select transducer type,and press the
key to confirm.
Menu
1 1
Enter
Menu
1
2
Enter
Menu
1
4
Enter
^
Enter
Menu 2
3
Enter
^
Enter
D116
Series Ultrasonic Flowmeter
Press Ent to start Manual Totalizer, then press Ent to
end Manual Totalizer, press Ent to input Standard
Totalizer to get the final K factor. Complete the
19
mm and pipe wall thickness of 6mm,
measuring medium is water,
can be operated as follows
:
keys to enter Window
M11, and enter the pipe outside diameter, and
key to enter Window
M12, and enter the pipe wall thickness, and
keys to enter Window
the
or
Material, and press th
e
(The transmitter is available for various
key to enter Window
key,move the
or
key to select transducer type,and press the
Manual Calibrate
Press Ent
When Ready
Set Zero
Please Enter PW
*R---------
System Normal
Pipe Outer Diameter
219 mm
Pipe Wall Thickness
6
mm
^
Pipe Material [14
0. Carbon Steel
^
Transducer Type [23
0. Standard
Series Ultrasonic Flowmeter
Page 12 of 53
measuring medium is water,
When Ready
Pipe Outer Diameter
219 mm
Pipe Wall Thickness
mm
Pipe Material [14
Transducer Type [23

PFlow Industries D116 Specifications

General

Brand	PFlow Industries
Model	D116
Category	Measuring Instruments
Language	English