Revision: 3.0.3
Inspection should be made before installing the Flowmeter. Check to see if the spare parts are in accordance with
the packing list. Make sure that there
is no damage to the enclosure due to a loose screw or loose wire, or other
damage that may have occurred during transportation. Any questions, please contact your representative as soon
as possible.
Transmitter
Accessories
MODEL: D116
Digital Correlation Transit -Time Flowmeter
Install accessory
Pipe Straps
D116
Series Ultrasonic Flowmeter
s
Inspection should be made before installing the Flowmeter. Check to see if the spare parts are in accordance with
is no damage to the enclosure due to a loose screw or loose wire, or other
damage that may have occurred during transportation. Any questions, please contact your representative as soon
Transducers
Documents
1.Instruction Manual
2.Packing List
3.Position drawing
Series Ultrasonic Flowmeter
Page 3 of 53
Inspection should be made before installing the Flowmeter. Check to see if the spare parts are in accordance with
is no damage to the enclosure due to a loose screw or loose wire, or other
damage that may have occurred during transportation. Any questions, please contact your representative as soon
To Next Page
Loading...
Need help?
General