PFlow Industries F Series - Enclosures 7

Section 7 |   Seies | 1570-100 | Rev  | 2022-03-01 | e-mail csd@pow.com
Section 7 | Mechanical Overview
www.pflow.com
P 414 352 9000
F 414 352 9002
6720 N. Teutonia Ave.
Milwaukee, WI 53209
In accordance with ASME B20.1, Section I-3.9, PFlow Industries, Inc. supplies
standard 8' (2,438 m) tall enclosure panels to be installed around the Vertical
Reciprocating Conveyor (VRC) as required by site conditions. The enclosure
panels are steel with 1-1/2"(38mm) angle frame and 16 gauge attened expanded
metal designed to reject a ball 2" (51mm) indiameter. PFlow Industries, Inc.
standard enclosure panels are typically 8' tall (2,438 m). Full height enclosures
(FHE) are furnished when designed for site specic requirements. See Figure 7-9.
Enclosures
Floor Level Enclosures
Figure 7-9