PFlow Industries F Series User Manual

 Seies | 1570-100 | Rev  | 2022-03-01 | e-mail csd@pow.com Section 7 | 3
Section 7 | Mechanical Overview
www.pflow.com
P 414 352 9000
F 414 352 9002
6720 N. Teutonia Ave.
Milwaukee, WI 53209
Safety Cam and Rollers
Figure 7-5
Four (4) safety cam assemblies are bolted to the carriage uprights and reside
inside the column. Two (2) twin roller guide wheelblock assemblies are bolted
to the carriage (one on each front side) with one wheel riding within the
column and the other wheel riding on the outside of the column. Two (2) special
wheelblock assemblies are bolted to the carriage (one on each back side) with
the block and one roller riding within the column and one roller riding on the
outside of the column. This allows the wheels to ride along the li columns and
guide the carriage travel. See Figure 7-5.
Safety Cam and
Wheelblock
Front
Safety Cam and
Twin Roller Guide
Location
Safety Cam and
Wheelblock Location

PFlow Industries F Series Specifications

General

Brand	PFlow Industries
Model	F Series
Category	Lifting Systems
Language	English