PFlow Industries F Series - To Operate the Lift

 Seies | 1570-1015 | Rev  | 2022-03-01 | e-mail csd@pow.com Section  | 5
Section 9 | Sequence of Operation
www.pflow.com
P 414 352 9000
F 414 352 9002
6720 N. Teutonia Ave.
Milwaukee, WI 53209
To Operate
the Lift
1. Close all gates and make sure the gate latches are engaged.
2. Press the desired oor level button to move the carriage to the desired level.
The carriage stops when the appropriate level is reached.
3. When the carriage arrives at the appropriate level and comes to a complete
stop, open the gate.
4. If an emergency occurs while the carriage is moving, push the emergency
stop (E-stop) button. The button will keep the VRC inoperable until the
button is pulled out. See Figure 9-8.
Push-Button Station
Figure 9-8
13675-0002.SMG
PFL-200115-3