Section 13 | F Series Preventive
Maintenance and
Schedule Checklist
www.pflow.com
P 414 352 9000
F 414 352 9002
6720 N. Teutonia Ave.
Milwaukee, WI 53209
Seies | 1570-101 | Rev | 2022-03-01 | e-mail csd@pow.com Section 13 | 1
The VRC requires minimal attention on a regular basis to prevent equipment failures or accelerated wear
and tear. VRCs operating during multiple daily shis need to be maintained more oen. This section is
provided for the assistance of qualied and trained service technicians only and is not intended for use
by untrained or unauthorized service personnel. Make sure all steps are completed. A record of regular,
properly conducted preventive maintenance provides a running history of any issues the VRC may have.
The reports will identify trends, and helps anticipate expected wear and tear repairs. Sign and return to
PFlow Industries, Inc. Customer Support Department via e-mail to csd@pow.com
A qualified person is defined as a person who, by possession of a recognized degree
or certificate of professional standing, or by extensive knowledge, training, and
experience, has successfully demonstrated his/her ability to solve problems relating
to the subject matter and work.
NOTICE
z If any defects relating to operating safety and reliability are detected or if
any damage occurs, the VRC must be taken out of operation immediately.
z Lockout/tagout the VRC before performing any maintenance. De-energize
any circuit before work is begun.
z Take appropriate measures for safely working at heights.
z Make sure that no persons or objects are within the range of any moving
parts of the VRC.
z Climbing, sitting, walking, or riding on equipment while the equipment is
in operation could result in death or serious injury.
z If this VRC needs to be modied in any way, contact PFlow Industries, Inc.
for assistance. Do not make any unauthorized changes.
z Before the VRC is put into operation, all VRC parts must comply with all
relevant health and safety directives and regulations.
z Close all gates before the carriage is moved. Never leave the li unattended
with the gates in the open position. Never close gates when a person is on
the carriage or within the fenced area.
z Entanglement hazard! Secure long hair, wear snug-tting clothing, and
avoid wearing jewelry while using the VRC.