PG Drives Technology R-NET BLUETOOTH MODULE User Manual

PG Drives Technology
14
R-net Bluetooth Modules Technical Manual | Chapter 2 - Installation
3 MOUNTING
3.1 ORIENTATION
A Bluetooth Module should be mounted so that water cannot enter and
remain in the connector recesses. The recommended mounting orientation is
such that the Module is lying flat. The function of a Bluetooth Module is not
sensitive to mounting orientation. The electronics compartment of the
controller has an IPx4 dust and water rating.
3.2 POSITION
A Bluetooth Module must be mounted in a position where it is not exposed to
levels of water, dust, shock or vibration above those expected on a mobility
application. The Bluetooth Modules have been tested in accordance with
IS07176/14 with respect to these conditions. Contact PGDT if you need further
advice.

PG Drives Technology R-NET BLUETOOTH MODULE Specifications

General

Brand	PG Drives Technology
Model	R-NET BLUETOOTH MODULE
Category	Wheelchair
Language	English