R-net Bluetooth Modules Technical Manual | Chapter 3 –
Programming
3.6 LONG NUDGE TIME
The parameter Long Nudge Time sets the time limit in which a Input Device
must be deflected and released to activate a Long command.
The Parameter Long Nudge Time is programmable between 0 and 5 seconds in
steps of 100ms.
The default value for Long Nudge Time is 3.0s.
It is recommended Long Nudge Time is programmed to a value
greater than Medium Nudge Time.
3.7 DEVICE NAME
The parameter Device Name allows the iDevice to have a unique name that
will be displayed in the Bluetooth list when pairing has been successful or on
initial pairing.
The Parameter Device Name can be a text string up to 20 characters in length.
The Parameter Device Name will be set to R-net iDevice Module by default.
To Next Page
Loading...