PG Drives Technology R-NET BLUETOOTH MODULE - Mode

PG Drives Technology
R-net Bluetooth Modules Technical Manual | Chapter 3 –
Programming
69
3.8 MODE
The parameter Mode sets the mode of operation for the iDevice module.
The programmable options are as follows:
VoiceOver – The iDevice will use VoiceOver mode on the connected
iDevice.
Switch Control – The iDevice module will use Switch Control mode on the
connected iDevice.
The Parameter Mode will be set to Switch Control by default.
Ensure the relevant mode is switched on, on the connected iDevice
to allow navigation in that mode. (Refer to Chapter 2, sections 6.5.4
or 6.5.7).