PhaseOne iXH - Camera Remote Triggering; Connecting the Remote Shutter Trigger

iXH Camera Systems Installation Guide
Page 13
7 Camera Remote Triggering
The iXH camera can be triggered by the following options:
• Remote Shutter Trigger
• Foot Pedal
• Through Capture One
7.1 Connecting the Remote Shutter Trigger
The Remote Shutter Trigger is used to remotely trigger the iXH camera. Use the 5-meter
trigger cable to connect the Hand release trigger with 30cm cable to the iXH camera.
To connect the Remote Shutter Trigger:
1. Connect the LEMO-of the iXH 5-meter trigger cable to one of the data terminals of
the iXH camera.