PhaseOne iXH - Firmware Handling; Checking the Camera Firmware Version; About the Phase One Firmware Updater Application

iXH Camera Systems Installation Guide
Page 38
18 Firmware Handling
The Camera Settings tool in Capture One can display technical information about the
hardware and embedded firmware of both the camera and lenses. body and back. This is
especially useful if support is needed or if you want to check if Phase One is offering a
newer firmware update.
Please make a note of the firmware menu contents before contacting the local partner or
Phase One Support.
18.1 Checking the Camera Firmware Version
To determine if you have the latest camera firmware installed:
1. Go to the Camera Settings tool and scroll down to About (insert new screen
grabs).
2. Check to see if the firmware version installed on the camera is the same as the
latest version available in the Downloads section of industrial.phaseone.com
website.
18.2 About the Phase One Firmware Updater Application
The Phase One Firmware Updater application is used to update your Phase One iXH
camera with new firmware. The Firmware Updater for Mac or Windows is available at the
Downloads section of the industrial.phaseone.com website.
The Firmware Updater does not in itself contain any firmware— it detects the camera
attached, checks online for the latest firmware and retrieves and installs the firmware
packages for your device.