iXH Camera Systems Installation Guide
Page 10
5 Mounting a Lens on the iXH Camera
Lenses of the iXH cameras are easily mounted.
Note:
▪ Ensure that you only mount lenses in a clean environment.
▪ Place a soft cloth down on the table to avoid scratching the lens.
▪ Ensure that you remove the rear lens cap (if attached) before mounting the lens.
To Mount a lens:
1. Place the Lens over the iXH camera body and guide it into position against the
camera body using the two large positioning pins.
Figure 5 – Positioning Pins
To Next Page
Loading...
