Philips 3000 V2 - Pump; Flow-Meter; Boiler

PHILIPS 3000 V2 07 DISASSEMBLY
5/7
7.10. Flow-meter
Lift the ow meter out of the casing assembly and remove the electrical and water circuit connections.
Unscrew the screw shown and remove the
electrical and water circuit connections.
Unscrew the screw shown at
unthread the support boiler
7.11. Boiler
7.9. Pump
Unhook the pump from the supports, and disconnect the water circuit connections (A) and electrical
connections (B), loosen the safety valve (C) and slide the pump o the brackets (D).
C
D
D
A
A
A
B
B
B