Philips 3000 V2 - Material; Specific Tools and Equipment

PHILIPS 3000 V2 01 INTRODUCTION
2/13
1.2. Material
Material Code and Description
Thermal paste Heat resistance > 200°C
Descaler 21001901 “ACC SAE DECALCIFIER 5 L 1 UNIT”
Grease solvent 132253695601 “PARALIQ GB 363”
Silicone grease 14-INTGR22004 “ACC TUBE FIN FOOD GREASE 2 400 ML”
 1.3.Specictoolsandequipment
As well as the standard equipment, the following is required:
12NC Description Notes
-
Flathead screwdriver # 0, # 2
-
Torx screwdriver
(T10-T20)
-
Cutter
-
Cable tie tightening tool
-
Pliers for Oetiker clamps
- Digital ermometer Type K (accuracy for temperature of 0,05 % or ± 0,3°C)
- Temperature probe 80PK-22 (80AK-A ermocouple adapter required)
- Scale
KERN EMB 500-1 or comparable device with a base
accuracy of 0,05 % or ± 0,5 g
- Power meter
Voltcra EnergyCheck 3000 or comparable device with
a base accuracy of 1 % or ± 5W
- Stopwatch Basic model
996530009845 Serkit Tool needed for programming with our service tool
-
EPSC (Espresso Philips Service
Center)
Tool used to ash the SW on the machines (for SW
upgrade and diagnostics mode). Refer to SDA_114585.
CP0159/01 421941306191
Black water
dispenser
Easycap only
CP0158/01 996530068626
Black milk intake
tube connector
Easycap only
CP0332/01 421944066941 Cappuccinatore Easycap only
CP0377/01 421944068711
Complete milk
carafe
Easycap only