16 First steps
2
Slide the on/o switch down to the O position to disengage the
keypad lock.
4.5 Inserting a microSD card
Caution
• Do not remove the memory card while recording is in progress. If
you do this, data may be damaged or lost.
1
Flip the memory card slot cover to the side.
2
Insert the microSD card into the card slot with the contacts facing
upwards.
3
Insert the memory card until it snaps into place.
4
To remove the card press the memory card slightly until the
snapping mechanism unlocks and the card is ejected.
Note
• To ensure that the device stores the recordings on the memory
card, you must switch from the internal memory to microSD
memory card (see also chapter 8.1.1 Set file location, page
26). The display shows a folder icon which indicates where the
recordings are currently being stored: u, v, w, x, –internal
memory, ¡, ¢, £, ¤–memory card.
To Next Page
Loading...
