Philips VoiceTracer DVT1250 - Playback and File Management; Selecting and Playing Recordings

22 Playback
6 Playback
6.1 Selecting a recording
1
Press a to select the desired folder while the device is stopped.
X The following symbols will be displayed, depending on the
selected location folder: u, v, w, x–internal memory, ¡, ¢,
£, ¤–memory card..
2
Press b while the device is stopped.
X The position indicator jumps to the start of the next file.
3
Press h while the device is stopped.
X The position indicator jumps to the start of the preceding
recording.
6.2 Playback a recording
1
Select the required file as described.
2
Press e to playback the selected file.
X The record/play indicator will light green. The total playback
time of the current file will be shown on the display.
3
Press the + / – buttons to adjust the volume.
4
Press the e key to pause playback.
X The playback will stop and the green LED will start blinking.
5
Press e to continue playback from the previous position.
6
Press the j key to stop playback.
6.3 Adjusting playback speed
1
During playback press the Menu key.
2
Press + / – to set the desired playback speed.
3
Press the record key g to confirm.