Philips VoiceTracer DVT1250 - Enabling;Disabling Key and Signal Tones

34 Settings
8.3.3 Enabling/disabling key and signal tones
1
In stop mode (start-up screen), press the Menu key.
2
Press h / b to select the device settings menu Õ.
3
Press the record key g to confirm.
4
Press + / – to select the Device sounds function.
5
Press the record key g to confirm.
6
Press + / – to enable/disable the keyand signal tones.
7
Press the record key g to confirm.
8
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.