Philips VoiceTracer DVT1250 - Display and Device Configuration

31
Settings
8.2 Display settings
8.2.1 Select language
Note
• Your language might not be available. Select an alternative one.
1
In stop mode (start-up screen), press the Menu key.
2
Press the h / b key to select the display settings menu Ô.
3
Press the record key g to confirm.
4
Press + / – to select the Language function.
5
Press the record key g to confirm.
6
Use the + / – keys to select the display language you want.
7
Press the record key g to confirm.
8
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
8.2.2 Adjusting the display contrast
1
In stop mode (start-up screen), press the Menu key.
2
Press the h / b key to select the display settings menu Ô.
3
Press the record key g to confirm.
4
Press + / – to select the Contrast function.
5
Press the record key g to confirm.
6
Press h / b to select the required display contrast.
7
Press the record key g to confirm.
8
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.