Philips WelcomeEye Connect 3 - Page 8

EN4
WelcomeEye Connect 3 / V2
Wall bracket
connection pins
GND and +24Vdc:
Connections for
the mains power
supply supplied
Add A and Add B: Connections to
an additional monitor (not supplied,
optional)
Bus A and Bus B: Connections to the
intercom panel
Location of wall
bracket retaining
lugs
Add B
Add A
BUS B
BU
S A
G
N
D
+24VD
C
Intercom panel:
Protective
shield
Lens
Loudspeaker
Screw for locking
the front pane
to the intercom
panel
Microphone
Brightness
sensor
Name holder
Call button
or family 2 name holder
RFID scan area
Important:
The locking screw must not be removed. To remove the front of the intercom panel, unscrew the
screw using the tool provided. The screw will go in instead of out when you unscrew it: this is normal.
Do not force the screw once it has been retracted: risk of damage.