Philips WelcomeEye Connect 3 - Page 9

EN5
WelcomeEye Connect 3 / V2
1
3
5
2
4
6
1 Gate A
3 Lock A
5 Bus A
Gate B 2
Lock B 4
Bus B 6
Microphone
Part to be grasped to
remove the protective
cover
Silicone protective cover
for connection terminal
blocks
1
3
5
2
4
6
1 Gate A
3 Lock A
5 Bus A
Gate B 2
Lock B 4
Bus B 6
Gate A and Gate B: Connection to gate motor drive control
contact (optional, not supplied)
Lock A and Lock B: Connection to an electric lock or strike plate
(optional, not supplied)
Bus A and Bus B: Connection to the monitor
Notes:
- When the call button or name holder is pressed, the monitor rings and the image is displayed.
- To change the label in the name holder (family 1) or replace the call button with a second name
holder for family 2, remove the front of the intercom panel and unclip from the top or bottom by
gently prying with a at-head screwdriver.
1
3
5
2
4
6
1 Gate A
3 Lock A
5 Bus A
Gate B 2
Lock B 4
Bus B 6