Phoenix Contact ILC 151 ETH - Table of Contents

8385_en_02 PHOENIX CONTACT 5
Table of contents
1 Foreword ....................................................................................................................................9
1.1 Purpose of this user manual ..................................................................................9
1.2 Hardware and software requirements ...............................................................9
1.3 General safety notes............................................................................................10
1.4 Intended use........................................................................................................10
1.5 Disposal...............................................................................................................10
2 Description of the Inline controller ............................................................................................11
2.1 General description of the Inline controller...........................................................11
2.2 Possible fields of application of the Inline controller.............................................13
2.2.1 ILC 131 ETH and ILC 131 ETH/XC ......................................................13
2.2.2 ILC 151 ETH, ILC 151 ETH/XC, ILC 171 ETH 2TX,
and ILC 191 ETH 2TX ..........................................................................13
2.2.3 The Inline controller as a PROFINET device in a PROFINET network .15
2.2.4 Applicative system redundancy with ILC 171 ETH 2TX or
ILC 191 ETH 2TX .................................................................................16
2.3 Notes on using the Inline controller in potentially explosive areas .......................17
2.4 Unpacking the Inline controller.............................................................................18
2.5 Connection and operating elements ....................................................................19
2.6 Diagnostics and status indicators ........................................................................21
2.7 Mode selector switch...........................................................................................24
2.8 Reset button (concealed) ....................................................................................25
2.9 Parameterization memory....................................................................................25
2.9.1 Inserting/removing the parameterization memory ................................26
2.10 Internal basic circuit diagram ...............................................................................27
2.11 Mounting and removing the Inline controller ........................................................28
2.12 Communication paths..........................................................................................32
2.12.1 Ethernet ...............................................................................................33
2.12.2 Serial PRG interface (mini-DIN socket) ................................................34
2.12.3 Serial PRG interface - function blocks ..................................................35
2.13 INTERBUS ..................................................................................................36
2.13.1 Local bus .............................................................................................36
2.13.2 Remote bus ..........................................................................................36
2.14 Power supply .......................................................................................................37
2.14.1 Sizing of the power supply ...................................................................37
2.14.2 Connecting the power supplies ............................................................38
2.14.3 24 V segment supply/24 V main supply ...............................................40
2.14.4 24 V segment supply ............................................................................40
2.14.5 24 V main voltage ...............................................................................40
2.14.6 24 V ILC supply ...................................................................................40
2.14.7 Jumpering ...........................................................................................40
2.15 Digital inputs and outputs ....................................................................................41