21
Here a batch can be:
• Modified – changing a pre-recorded dispense time.
• Taught – manually dispense water while the system records the time. This will enable repeated
dispensing of a specific volume of water.
• Cleared – deleting saved batch information.
• Labeled – giving a specific batch a name.
• Saved – saving input information for future use.
Batch Edit Screen
To teach a batch, press the “Teach” button on the Batch Edit screen. The Batch Teach screen will appear.
• Place a volume measuring container capable of holding the desired volume underneath the
dispensing point of the system.
• Press the dispense button to begin flow.
• Monitor the volume output.
• Once the desired amount is reached, press the dispense button again. The system will
automatically retain the amount of time the dispense button was active, and return to the “Batch
Edit” screen.
Batch Teach Screen
To Next Page
Loading...
Need help?
General
