20
Using a Bluetooth device: pairing and connecting
If your device is Bluetooth-enabled and supports the
appropriate profiles, it can communicate with the
iCom only after completing two simple procedures:
Pairing and connecting.
The pairing procedure allows you to control which
Bluetooth devices are permitted to communicate with
each other. It needs to be completed only once for
each device you wish to use with your iCom. The pairing
procedure is described in detail for each of the
Bluetooth device types in the sections which follow.
Once a device is permitted to communicate with the
iCom by the pairing procedure, the connection
procedure configures the device to actually output
its audio signal over the Bluetooth connection. This
procedure is also described in the sections which follow.
Some Bluetooth devices perform the connection
procedure automatically after pairing.
Introduction to Bluetooth
To Next Page
Loading...
Need help?
General
