EasyManuals Logo

Phonak iCom User Manual

Phonak iCom
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
24
Pairing and connecting iCom with a
Bluetooth transmitter
If you wish to use your iCom to listen to music from
your stereo system or make phone calls with your
landline telephone but these devices are not equipped
with Bluetooth functionality, you may use an external
Bluetooth transmitter.
As described above, it is necessary first to perform the
Bluetooth pairing procedure between your iCom and
Bluetooth transmitter. The pairing procedure is controlled
by the device with which you are attempting to pair.
Such devices vary in the procedure they require for pairing.
You should therefore refer to your device’s user guide
or dealer support if you cannot complete the pairing
procedure with the generic steps described here.
1. Charge and turn ON both your iCom and Bluetooth
transmitter. Place them next to each other.
2. Initiate the pairing process on your iCom by pressing
the Bluetooth button for about 2 seconds until
the Bluetooth indicator flashes blue. Your iCom will
remain in the pairing mode for two minutes or
until the pairing is completed.
Setting up Bluetooth devices

Other manuals for Phonak iCom

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Phonak iCom and is the answer not in the manual?

Phonak iCom Specifications

General IconGeneral
BrandPhonak
ModeliCom
CategoryHearing Aid
LanguageEnglish

Related product manuals