25
3. Set your Bluetooth transmitter into pairing
mode. With some devices, simply turning them
ON initiates the pairing process.
4. A Bluetooth transmitter typically doesn’t require
a passcode or passkey to establish a connection
with iCom. After initiating pairing, simply wait until
the devices have completed the pairing process.
If a passcode is required, enter “0000” (four zeros).
Typically, with Bluetooth transmitters the connec-
ting process is automatically performed after pai-
ring.
Confirmation of successful connection is indicated
on iCom by the Bluetooth indicator slowly flashing blue.
If this is not the case, refer to the user guide of your
Bluetooth transmitter.
To Next Page
Loading...
