41
• Place the FM transmitter near the sound source or
connect it to your TV, radio etc. and turn it ON.
• Turn the FM receiver ON. If you use a MicroMLxS,
receiver, set the switch to the position "•".
The FM transmitter transmits the signal via radio to
your FM receiver attached to iCom. The FM signal
is then sent to your hearing instruments via iCom.
The streaming indicator will light solid yellow to
indicate FM usage.
The FM connection will remain ON for at least
60 seconds even with no signal transmitted to ensure
uninterrupted transmission in situations such as
lectures.
To deactivate FM, turn OFF the attached FM receiver or
unplug it. iCom will automatically activate the default
hearing program.
For more information about the usage of your FM
system, please refer to the respective user guide.
To Next Page
Loading...
Need help?
General
