1
IS16
English
PART ONE: OVERVIEW
• Optional mREC expansion card featuring a standalone
16-channel PCM WAV recorder and a FireWire/USB 2.0
multi-track recording audio interface; USB 3.0 ash drives
compatible
• AudioInterfacecompatiblewith Windows XP,Windows
Vista,Windows7,Windows8andMacOSXoperatingsystems
• Wireless operation through Wi-Fi connection and Ethernet
remote control
• VGA D-Sub output:Progressivescan up to1024x768
@60Hz(XGA)
• All featuresandfunctions ofthe IS16can beaccessed
through the use of a USB 2.0 wireless or wired mouse
• Rackmountingkitincluded
System Components
TheIS16packagingincludesthefollowing:
• IS16Console
• 16x16FireWire/USBExpansionCard(installed)
• PowerSupply(100Vto240V,50–60Hz)
• Rackmountears
• UTD-10 USB WiFi dongle
• User’smanual
The following components are optional and may be purchased
separately:
• mRECExpansionCard(16-in,16-outwithUSBRecording)
• SDCard(SecureDigitalMemoryCard)
• Headphoneswith¼”phonejack
• Condenserordynamicmicrophones
Operational Requirements
During operation, the front and rear panels of IS16 should be
exposed to ambient air. Please do not block the ventilation holes
on the rear panels of IS16 console. Please do not operate in
direct sunlight or at any extreme temperature. The ideal operating
environment is from 10 to 38 degrees Celsius (or 50 to 100 degrees
Fahrenheit).
Maintenance
Please do not use any alcohol cleaning solutions on the surface
of IS16. Use a non-abrasive dry cloth only.
Power Connections
EachIS16requiresitsownpowersupplyunit.TheIS16’sPSU
is capable of operating at 50 to 60 Hz across a voltage range of
100to240V.Inaddition,apower-conditioner(notincluded)is
highly recommended.
Analog and Digital Audio Connections
The IS16 analog inputs and outputs (with exception to the
headphone outputs) are balanced XLR and balanced ¼” TRS
connections.Theheadphoneoutputsareunbalancedstereo¼”
TRS jacks. Digital audio input and output is achieved through
AES/EBU(XLR)connections.Pleaseuseonly110-ohmcables
for digital connections.
Introduction
Congratulations on your purchase of the IS16 digital mixer,
the rst full-digital mixing console from Phonic. With ultra low-
noise circuitry, including high quality, low-loss analog to digital
converters,theIS16offerseverythingadigitalmixershouldina
sleek,attractivedesign.TheIS16offers16monoinputchannels
– offering XLR Mic and 1/4” Line inputs – all of which can be
assignedtoanyofthe8AUXor8Subgroupmixes.Atotalof8
‘Multi’outputsareofferedinadditiontothemainstereooutput.
AES/EBU digital inputs and outputs can be used to send and
receive signals to and from the Main mix.
AnyAUXmixorinputchannel can beassigneddirectlytoone
of the digital effectprocessors, each of which offers at least 8
effectswithmultipleuser-denableparameters.EffectProcessor
1alsooffersanadditional24reverbeffectswithupto7adjustable
parameters each. Each effect processor furthermore offers its own
multi-bandgraphicequalizer.Gate,Expander,Compressorand
Limiterdynamicprocessescanbeassignedtoallinputchannels.
Also available on each input and output channel is a 4-band semi-
parametric EQ and a delay function.
While the IS16 was designed to be intuitive and user-friendly,
thereisstillmorethanlikelyathingortwoyou’llneedabitofhelp
with.Thatbeingthecase,wesuggestyoutakethetimetoread
throughthisuser’smanualandkeepithandyforfuturereference.
Features
• 16 mono mic/line with insert points and grouped phantom
power
• Internaldigitalsamplingrateupto96kHzin24-bit
resolution
• Compactdesignachievedthrough16fadersencompassing
threelayers(Channel,AUX/Group,Multi)
• 17 ultra-smooth100 mmmotorizedfaders arranged ina
familiar analog mixer arrangement
• HighqualityGUIinterfaceonboardaccessedthroughafull
color touch-screen
• 31-band GEQavailableonEFX 1 andMainoutand15-
bandGEQonEFX2
• 4-bandparametricEQscanbefoundonallinputchannels,
multi outputs and main outputs
• DigitalAES/EBUinputandoutput
• Eightbalanced1/4"phonejack'multi'outputs
• 8AUXand8Groupbusesassignableto‘multi’outputs
• Dualtrue algorithm-based multi-effectsprocessor. Effects
canbeappliedtoanyinputchannel,auxsendorgroup,and
the stereo effect signals can be assigned to main stereo mix
or all eight multi outputs
• 4-bandparametricEQ,variabledelayanddynamic
processors available on all input and output channels
• Internal96kHzsamplingratein24-bitresolution
• Intuitiveuserinterface
• 25 dynamic processors available on input channels, ‘multi’
outputs and main mix
• Saveandinstantlyrecallscenesatthetouchofabutton
• Processingaccomplishedthroughahighquality40-bit
oatingpointdigitalsignalprocessor
• Built-In16x16FireWire/USB2.0multi-trackrecordingonPC
and Mac computers
• Wi-FiUSBdongleUTD-10included
1. Read these instructions before operating this
apparatus.
2. Keep these instructions for future reference.
3. Heed all warnings to ensure safe operation.
4. Follow all instructions provided in this document.
5. Do not use this apparatus near water or in locations
where condensation may occur.
6. Clean only with dry cloth. Do not use aerosol or liquid
cleaners. Unplug this apparatus before cleaning.
7. Do not block any of the ventilation openings. Install
in accordance with the manufacturer
í
s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If
the provided plug does not
into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plug, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories
by the
manufacturer.
12. Use only with a cart, stand, tripod, bracket, or
table
by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury from tip-
over.
13. Unplug this apparatus during lighting
storms or when unused for long
periods of time.
14. Refer all servicing to
service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED PERSONNEL
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated
ì
dangerous voltage
î
within the
product
í
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is in-
tended to alert the user to the presence of important operat-
ing and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING: To reduce the risk of or electric shock, do
not expose this apparatus to rain or moisture.
CAUTION: Use of controls or adjustments or performance
of procedures other than those
may result in
hazardous radiation exposure.
The apparatus shall not be exposed to dripping or splashing and that no objects
with liquids, such as vases,
shall be placed on the apparatus. The MAINS plug is used as the disconnect device, the disconnect device shall
remain readily operable.
Warning: the user shall not place this apparatus in the
area during the operation so that the mains switch
can be easily accessible.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
To Next Page
Loading...
Need help?
General
