© PSI (Photon Systems Instruments), spol. s r. o.
13
5 CARE AND MAINTENANCE
FluorPen and Monitoring Pen
• Never submerge the device in water! (except Monitoring Pen MP 100-A)
• The device should not come in contact with any organic solvents, strong acids or bases.
• Keep the optical part clean and dry. If cleaning is needed, use soft, non-abrasive tissue.
• Battery charge lasts approximately 48 hours when the FluorPen is operated continuously.
• If the battery can no longer be charged please contact PSI for replacement battery and installation
instructions.
Li-ion battery
• Avoid fully discharging of the battery
• Do not keep the battery at full charge for all the time
• Keeping at high temperatures shortens battery life
To Next Page