© PSI (Photon Systems Instruments), spol. s r. o.
36
10 BLUETOOTH CONNECTION
In addition to data transfer via USB the FluorPen may be connected to the software via Bluetooth. Before setting up
the Bluetooth connection between the FluorPen and the PC, ensure the following components are in place:
1. Bluetooth enabled PC
The PC must have Bluetooth wireless technology, either built-in or through a Bluetooth card. Ensure that the PC's Bluetooth
setting is in "discoverable" mode (meaning that it shows up when other devices search for nearby Bluetooth connections).
Consult the user guide for the PC or Bluetooth card to learn how to do this.
2. Bluetooth configuration software properly set up on the PC
Before connecting the device to the PC and downloading data files the Bluetooth software that came with the PC, or the
PC Bluetooth card Is activated. This software varies by manufacturer. Please consult the documentation that came with
the PC of card for more information.
3. Bluetooth must be switched on and be visible on both devices
To pair the FluorPen with another Bluetooth device, such as a PC, ensure that Bluetooth is switched on and visible on both
devices.
10.1 BLUET OO T H PAIRING
1. Enabling Bluetooth on the FluorPen
• Switch ON the FluorPen (press and hold the SET key for 1 sec).
• Scroll to the Accessories menu (press the MENU key), and select Accessories by pressing the SET
key.
• Select Bluetooth (press the MENU key), then turn it ON by pressing the SET key.
2. Starting Bluetooth Application on Your PC
The following description of how to set up the Bluetooth connection between the computer and the device is
for Windows 7; some of the steps may be different if different version of Windows is used.
• Select: Start > Devices and Printers (Fig. 13).
You may also start your Bluetooth application via the Control Panel: Start > Control Panel >
Hardware and Sound > Devices and Printers.
To Next Page