Photon Systems Instruments FluorPen FP 110 - Page 7

© PSI (Photon Systems Instruments), spol. s r. o.
7
Monitoring Pen
Protocols
- Ft – instantaneous chlorophyll fluorescence
- Quantum Yield
- OJIP
- Non-photochemical quenching
- Light curve
LED lighting
LED emitter
Blue (455 nm), other wavelength on request
Saturating pulse Illumination
Up to 3,000 µmol(photon).m
-2
.s
-1
(adjustable from 10 to 100%)
Actinic Illumination
Adjustable from 10 to 1,000 µmol(photon).m
-2
.s
-1
Measuring Illumination
Up to 0,09 µmol(photon).m
-2
.s
-1
per pulse (adjustable from 10 to 100%)
Detector
Type
PIN photodiode with bandpass filters
Wavelength range
From 667 to 750 nm
Data storage and transfer
Internal memory capacity
Up to 16 Mb
Internal data logging
Up to 149,000 measurements (depending on protocol)
Data transfer
Serial cable
PC software
FluorPen 1.1 (Windows 7 and higher)
Battery
External battery
Standard battery pack
- operating temperature from 10 to 40 °C
- rechargeable
Extended temperature range battery pack
- operating temperature from -40 to 60 °C
- non-rechargeable (spare battery)
Capacity
12Ah
Battery life
Up to 2 years of operation (1 QY measurement per hour)
Other
Sample holder
Probe
Display
2 x 8 characters LC display
Keypad
Sealed, 2-key tactile response
Turns off after 5 minutes of no use
Size
134 x 65 x 33 mm
Weight
188 g
Warranty
1 year parts and labor
Bluetooth Module Compliance Data: