Select the POTENTIOMETER RESET option from
the SYSTEM RESET menu and press OK.
WAIT....
PROCEDURE IN PROGRESS
The hand-held computer displays the words:
CHECK THAT THE CONTROL IS SET AT 12°
FROM THE LOWER STOP. PRESS OK TO CON-
TINUE
Press OK
The hand-held computer displays the words: POS-
SIBLE LIMIT STOP VALUES. PRESS A KEY AND
SHIFT OFF AND ON
If this is not successful, the tilt locking mechanism
remains locked for safety.
Adjust the flexible transmission so that a small
clearance is left to guarantee switch activation on
the tilt locking calliper
Electrical devices test
PRINCIPLE DIAGRAM FOR TILT LOCKING ELECTRICAL SYSTEM
MP3 250 i.e. Suspensions
SUSP - 29
To Next Page