Brakes
BRAKES
Specification Desc./Quantity
Front brake Disc brake, diameter 260 mm and floating calliper with twin
plungers and hydraulic control (lever on the far right of the han-
dlebar)
Rear brake Disc brake, diameter 260 mm and calliper with two counteract-
ing plungers and hydraulic control (lever on the far left of the
handlebar)
Wheels and tyres
WHEELS AND TYRES
Specification Desc./Quantity
Front wheel rim Light alloy, 3.00 x 16"
Rear wheel rim Light alloy, 3.50 x 16"
Front tyre 110/70-16" M/C 52P Tubeless
Rear tyre 140/70-16" M/C 65P Tubeless
Front wheel tyre pressure (when cold) 2.1 bar
Rear wheel tyre pressure (when cold) 2.3 bar
Rear wheel tyre pressure (with driver and passenger) (when
cold)
2.5 bar
N.B.
CHECK AND ADJUST TYRE PRESSURE WITH TYRES AT AMBIENT TEMPERATURE. REGU-
LATE PRESSURE ACCORDING TO THE WEIGHT OF THE RIDER AND ACCESSORIES
Secondary air
The SAS for 125cc leader engines operates in a similar manner to the SAS for 2T engines.
The differences are the following:
instead of entering through the muffler as for 2T engine, the secondary air enters directly in the discharge
pipe on the head.
Characteristics B 125-250
CHAR - 10
To Next Page
Loading...
