Shock absorbers
Removal
Proceed as follows:
- place the scooter on its centre stand;
- lift the engine a little with a jack so as to free the
two shock absorbers;
- remove the muffler
- undo the shock absorber spring assembly clamp-
ing screw from the support fixed to the engine on
the one side and from that fixed to the muffler on
the other;
- unscrew the two upper nuts (one on each side)
fixing the shock absorber spring assembly to the
frame and remove the shock absorbers.
See also
Exhaust assy. Removal
Refitting
Carry out the previous operations but in reverse order.
Locking torques (N*m)
Lower shock absorber clamp 33 ÷ 41 Upper shock absorber clamp 33 ÷ 41
Exhaust bracket
B 125-250 Suspensions
SUSP - 235
To Next Page
Loading...
