01_09
Setting the outside temperature display (01_09)
The temperature value «8» updates automatically at every variation of ± 1 °C. When
the external temperature reaches +3 °C, the display flashes for 40 seconds; the same
occurs at every decrease of temperature.
Press «M» to display the mean speed, identified by symbol «MEAN», which updates
automatically every 30 seconds even if the key is set to «OFF». Press «M» to display
the maximum speed reached by the vehicle and identified by the symbol «MAX»,
press again to display the kilometres traveled in reserve; the value is stored also with
key set to «OFF». Press «M» again to return to the outside temperature display. Keep
«M» pressed for more than 3 seconds to reset the selected function, except the tem-
perature.
WARNING
WARNING
THE FLASHING FUNCTION WHEN A TEMPERATURE OF +3 °C AND LESS IS
REACHED HAS PRIORITY ON THE MEAN AND MAX SPEED INDICATION, SO IT
IS AUTOMATICALLY DISPLAYED. HOWEVER, YOU CAN PRESS BUTTON «M»
TO DISPLAY THE SPEED AND DISTANCE COVERED IN RESERVE VALUES.
01_10
Kilometres/miles covered in reserve symbol (01_10, 01_11)
The symbol is automatically displayed when the fuel reserve light indicator «E» turns
on, along with indicator «8» of the kilometres/mph covered in reserve. This function
has the utmost priority over the previous three ones, so when the vehicle is in reserve,
icon «7» is automatically displayed along with the kilometres being covered in reserve
are displayed. Press «M» to return to the other information.
N.B.
N.B.: THE AVERAGE MILEAGE IS CALCULATED BASED ON EACH RESET AND
IS AFFECTED BY THE VEHICLE'S ROUTE AND AMOUNT OF TIME.
12
To Next Page
Loading...
