02_04
Shock absorbers adjustment (02_04)
The preloading of the springs can be adjusted in 4 positions by working on the ring
nut located in the lower part of the shock absorbers, using the specific spanner sup-
plied.
Minimum preloading
Position 1: only the driver
Medium preloading
Position 2: driver and baggage
Medium preloading
Position 3: diver and passenger
Maximum preloading
Position 4: driver, passenger and baggage
To make it easier it is possible to use the shock absorber wrench with the spark plug
wrench.
CAUTION
RIDING THE VEHICLE WITH THE SPRING PRELOADING NOT CORRECTLY SET
FOR THE RIDER AND POSSIBLE PASSENGER, COULD REDUCE THE COM-
FORT OF THE RIDE AND THE PRECISION OF THE STEERING.
WARNING
WE RECOMMEND WEARING GLOVES WHILE CARRYING OUT THIS OPERA-
TION IN ORDER TO AVOID INJURIES.
36
To Next Page
Loading...
