Intercom operation
The intercom can be operated in two ways: automatic or manual. Entering the keys
«M» and «S» in sequence makes it possible to select the type of operation: automatic
low, automatic high, manual.
AUTOMATIC ACTIVATION:
Recommended for use with a full helmet.
Communication is activated by the voice of the driver or passenger. Two levels of
activation are available:
- High = high sensitivity = a "normal" voice volume will activate intercom operation.
- Low = low sensitivity = a higher voice volume is required to activate intercom oper-
ation.
When turned on the device goes to the Low level. Enter the keys «M» and «S» in
sequence to activate High level. The intercom mode remains active for a period of
around 20 sec. at the end of the conversation.
MANUAL ACTIVATION:
Recommended for use with a Jet helmet. The intercom function can be set so for only
manual activation by the driver: press the keys «M» and «S» in sequence from the
High mode automatic activation position. To speak with the passenger press the key
«M» twice.
CAUTION
WARNING
If automatic activation is entered, the driver can start a conversation also via
manual activation (pressing key «M» twice). At the end of the conversation Low
level automatic operation is restored. During conversation in intercom mode,
the audio from the radio remains in the background at a lower level.
MANUAL INTERCOM
51
To Next Page
