Piazzetta P960 - Page 32

INTERRUPTION OF POWER SUPPLY
Action Description Display
If there is a blackout while the stove is in operation, there are two
possibilities of procedure according to stove set-up:
- blackout without timer thermostat settings.
- blackout with timer thermostat settings.
Blackout without timer thermostat settings.
When the electricity supply is restored, the appliance restarts automatically.
•The grate cleaning phase activates.
•The fan operates at full speed to allow the stove to cool.
•The automatic stove restart cycle starts (the steps detailed in the
‘STARTUP’ phase are repeated automatically).
•Once the ignition cycle has been completed the stove operates normally
at power level 2 with Multifuoco on 2.
Blackout with timer thermostat settings.
There are 3 possible situations.
- Blackout straddling the time set for ignition: the stove does not restart.
- Blackout straddling the time set for shutdown: the stove restarts when
the electricity supply is restored.
- Blackout within the programmed operating time band: the stove restarts
when the electricity supply is restored.
Restarting is carried out with the same procedure as listed in “Blackout
without timer thermostat settings”.
1
CLEANING
12:0073F
DT2040061-05
EMERGENCY LIGHTING OF STOVE
Action Description Display
If the glow plug is not working, the stove may be lit manually as follows:
- pour a small quantity of pellets into the grate;
- use a lit piece of solid relighter (not liquid) to ignite the pellets;
- close the door;
- start the stove using the ON/OFF button.
a This procedure is only to be carried out in an emergency while waiting for the servicing technician to arrive.
DT2040098-00
H07028100/DT2000970 – 01
32
English