Piazzetta P960 - When Not in Use; Scheduled Maintenance

DT2010096-04
7.12 whEN NOT IN USE
When shutting the stove down for the summer, proceed as follows:
- remove all pellets from the hopper and feeding auger;
- carefully clean the grate, the grate support and the ash drawer;
- using a steel brush, clean the bafe plate or internal bafe plates of the rebox and coat them using the spray paint, supplied with the kit, to prevent
them from oxidising and consequently forming rust.
a If the cast-iron parts inside the rebox are not coated, rust could form. This is a natural process, which does not affect the efciency
and quality of the product.
- Clean the ue thoroughly: contact a professional chimneysweep for this purpose;
- clean by removing all dust, cobwebs, etc. from the area behind the inner lining panels once a year, in particular the fans;
- disconnect the power cable from the power supply;
- remove the batteries from the remote control.
DT2012636-00
7.13 SChEdULEd MAINTENANCE
a Scheduled maintenance must be carried out ONCE A YEAR and prior to starting up the appliance, especially after a long period of
inactivity. This maintenance is necessary to ensure the appliance remains in efcient and safe working order.
a The appliance must be DISCONNECTED FROM THE POWER SUPPLY for all cleaning and maintenance work.
a Since the following maintenance necessitates removing some parts of the appliance, it is advisable to have the scheduled maintenance
carried out by an After-Sales Service Centre or a qualied person.
- Clean the grate (see “CLEANING THE GRATE”).
- Clean the rebox (see “CLEANING THE FIREBOX”).
- Clean the ue system (see “CLEANING THE FLUE SYSTEM”).
- Clean the painted metal parts (see “CLEANING THE PAINTED METAL PARTS”).
- Clean the glass (see “CLEANING THE GLASS”).
- Clean the fans (see “CLEANING THE FANS”).
- Clean away dust and cobwebs from the gap between the appliance and the cladding.
- Check the electrical part and the electronic components.
- Check the tightness and state of the gaskets/seals of the glass door and of all the elements subject to wear and if necessary replace.
- Carry out all maintenance and checks required for correct operation and compliance with safety regulations and standards.
- Light the appliance in accordance with instructions given under “LIGHTING FOR THE FIRST TIME”.
H07028100/DT2000970 – 01
57
English