Pike Evolution T5 User Manual

operator’s guide
PSL2021 issue 2 rev a
T5 • PT5 • PT4+
This guide covers Evo T5,
PT5 and PT4+ controllers
in their standard dual-channel plus newer
MULTI channel versions. Please see page
13 for important information.

Pike Evolution T5 Specifications

General

Brand	Pike
Model	Evolution T5
Category	Controller
Language	English

Summary

System Installation and Setup

Preparing Controllers for Operation

Steps to configure slave and master controllers before system activation.

Master Controller Configuration

Initial Setup and Phase Configuration

Steps for setting up radio channels, power, vehicle, and pedestrian phases.

Starting and Testing Operation

Procedures for initiating system operation and performing a test start.

Pedestrian Only Installations

Using Pedestrian Only Mode

Linking Phases

Transmitter Power Settings

System Operation

Making Timing Adjustments

How to adjust phase timings to improve traffic flow and clear queues.

Operation Modes

Understanding Mode Selection

Communication Failures

Handling Temporary and Serious Losses

Procedures for system response to temporary and serious communication failures.

Hold All Red Function

Invoking Hold All Red from Master/Slave

Battery and System Reset

Resetting the System After Errors

Steps to reset the system following faults or failures.

Decommissioning the System

Incidents During Operation

Response to Signal Failures and Conflicts

System reactions to vehicle/pedestrian signal failures and green signal conflicts.

Error Indication Codes

Mimic, Battery, and Comms Indicators

Text Display Error Codes

Understanding Alphanumeric Status Codes

List and explanation of text display codes for various faults and statuses.

Troubleshooting Guide

Indicator and Battery Faults

Text Display Codes

Appendix 1: Phase Set Up Examples

Vehicle and Pedestrian Phase Configurations