Pilz PNOZ m B0 User Manual

Commissioning
Operating Manual PNOZ m B0
1002660-EN-07
23
6.3 Function test during commissioning
CAUTION!
It is essential to check that the safety devices operate correctly
– after the chip card has been exchanged
– after a project has been downloaded
– when the project has been deleted from the base unit's memory ("Re-
set Project" menu)
6.4 Using the chip card
NOTICE
The chip card contact is only guaranteed if the contact surface is clean and
undamaged. For this reason please protect the chip card's contact surface
from
– Contamination
– Contact
– Mechanical impact, such as scratches.
NOTICE
Switch off the product before inserting or exchanging the chip card.
Make sure that you do not bend the chip card as you insert it into the chip card slot.

Pilz PNOZ m B0 Specifications

General

Brand	Pilz
Model	PNOZ m B0
Category	Controller
Language	English