Captain-i Installation Guide 19
The following pages provide detailed instructions of each function.
CAPTAIN-i factory default codes are as follows:
Primary (Master) Code: 5555
Technician Code: 1234
Some of the screens appear as an “options bar” in which you must determine whether
certain option will be enabled (+) in the system or disabled (-).
For example:
BOFHIDE Bypass
---++-- Zn.Char1
♦ Use
or to scroll between the options on the same screen
♦ Use
to enable (mark “+”) or disable (mark “-“) an option. The key has a
toggle function
♦ To save the screen, press
♦ When the cursor is blinking, a description of the option appears at the top right
side of the screen (Bypass in the above example)
♦ During programming of zone characteristics, the zone number appears at the
bottom right side of the screen, for example Zn.Char4. To jump directly from one
zone to another, press keys 1-6 to obtain the zone number or
to advance
the zone numbers without saving
.
4.4.1 Key functions in the technician menu
Following entry of the correct technician code, the system enables modification and
execution of functions that cannot be accessed by the end user. In this case, each
key enables a specific function. The following are the keys and the function screens
accessed from each. In some cases more than one function is allocated for one key,
and in this case press
or for the next function of that key.
Key Function Page
Zone sensitivity 21
Zone characteristics (24 hours, delayed, EOL, etc.) 21
Zone responses (siren, PGM, communication, SMOKE, partition) 22
Zone names 22
To Next Page
Loading...
Need help?
General
