Captain-i - Installation Guide 9
Chap 2. Partitions
CAPTAIN-i can be configured into 2 partitions with the following settings:
1. Each zone and each user can be assigned to one of the two partitions or both
2. Each partition can have a different subscriber (account) ID
3. All keypads connected to the system show the same display, regardless their
partition.
For additional information:
To assign zones to partitions: see section 5.1.3
To program subscriber (account) ID: see section 5.2.5
To assign users to partitions: see section 5.4.11
See “CAPTAIN-i User Guide” for information on keypads display and partitions
To Next Page
Loading...
Need help?
General
