Pima Hunter-Pro 32 - Entering User Menu

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
11
Programming key
-
Programming key Display service Provider
information
 Programming key
 Test siren, battery, AC, and tel.
line
-
Programming key Display system’s name and
version
2.3 Entering User Menu
In order to program and change data in the user level, you must first
enter the User Menu. User Menu can be fully accessed by the system
administrator (owner) when using the Master Code.
Other users can also access the User Menu but are limited to the
number of available functions according to their authorization level
programmed by the system administrator (owner).
To learn more about authorization levels and how to change them
see “Programming Codes” on page 22
2.3.1 Entering User Menu with Master Code
To access the User Menu:
 Master Code
User Menu
Choose 1,2...
 Function key (see page
10)
2.3.2 Entering User Menu with User Code
If user is enabled by technician to enter the User Manu:
 User Code
User Menu
Choose 1,2...
 Function key (see page 10)
If user is not enabled by technician to enter the User Menu (i.e.,
User Code arms/disarms the system), the menu can still be accessed
as follows: