HUNTER-PRO 32 Intruder Alarm System - Installation Manual
22
CHAPTER 4:
PROGRAMMIN
G AND
OPERATION
4.1 Programming Codes
A code is a combination of numbers that allows programming,
arming, disarming the system and more. During the programming
process, the keypad’s display will show the name of the code you
want to program. At any stage of the programming, it is possible to
return to the main menu by pressing the
key.
IMPORTANT!
Pay attention that HUNTER-PRO 32 has a code-control feature that
does not allow entering identical codes. For example, if one of the
user (or master) codes is programmed as 1010, any attempt to
program a new code as 1010 or starting with 1111 (e.g., 10101,
10102, 10103, etc.) will display an error message.
4.1.1 Programming Master Code
The default Master Code is: 5555.
The Master Code can ONLY be changed with the master code.
The Master Code is used for accessing memory and programming
different function as described further. It is also possible to arm and
disarm the system with the Master Code.
IMPORTANT!
Pay attention that the code need to be between 4 and 6 digits:
To Next Page
Loading...
