HUNTER-PRO 32 Intruder Alarm System - Installation Manual
35
4.6 Panic
To activate panic, press and hold simultaneously the and
keys for two seconds.
NOTE:
You can customize your system's response to a panic event, for
example, calling the Monitoring Station or your private telephone
number, activate a relay (video camera), activate siren, etc.
Consult your installer about programming the appropriate Panic
Response for your needs.
4.6.1 Panic Button
(Optional feature) Pressing the button triggers
sirens and send a panic signal to monitoring station
and/or dial to private telephone number (according
to technician programming).
4.7 Smoke and Fire Detectors Alarm
In case an alarm is triggered due to smoke/fire detectors, press and
hold the
key (until a confirmation sound) in order to reset and
release the detector.
4.8 System Tests
This feature tests that the back-up battery, siren and telephone line
are in order.
NOTE:
The battery’s status can be tested only when the system is
connected to mains power source.
Master Code/Enabled User Code/Zero long press+User Code
To Next Page
Loading...
