Pima Hunter-Pro 32 - Deleting User

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
24
 …
User 1 *
ENTER/NEXT/END
 Enter user number (1-24)
-OR-
User 1 *
ENTER/NEXT/END
(Enabled User Code)  Enter user number (1-
24)
NOTE:
An asterisk (*) placed to the right of the user’s name means that the
user is already defined in the system.
Following are the different options with user programming
4.1.2.1 Changing (adding new) User Code
User 1
ENTER/NEXT/END

Enter/Change Code
ENTER/NEXT/END

User 1
****** (4-6)
Enter a new User Code (4 to 6 digits) and press
to save.
4.1.2.2 Deleting User
User 1
ENTER/NEXT/END
 
Delete Code
ENTER/NEXT/END
IMPORTANT!
After pressing , all user settings will be deleted!
4.1.2.3 Entering User Name
User 1
ENTER/NEXT/END
  X2
User Name
ENTER/NEXT/END

User Name 1
User 1
You are now ready to enter text.