Pima Hunter-Pro 32 - 4.1.1 Programming Master Code; 4.1.2 Programming Users

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
23
 Master Code …
User Menu
Choose 1,2...

Master Code
ENTER/NEXT/END
  New Master Code 
IMPORTANT!
For better protection, change the default code after installation.
4.1.2 Programming Users
The User Codes are mainly for arming and disarming, but depending
on the user’s authorization level, the user can also go into the User
Menu and perform various tasks as viewing memory changing other
users settings, program telephone numbers, etc.
HUNTER-PRO 32 holds up to 24 different User Codes, 4 to 6 digits
each.
See “Entering User Menu” on page 11 for a description on how to
access the User Menu with User Code.
NOTE:
 A name can be programmed for each user, a time frame in which
he will be active, allocation to one partition or more as well as
limiting authorizations.
 User Code is a number of 4 to 6 digits.
 Master Code /Enabled User Code
User Menu
Choose 1,2...

-OR-
  User Code
User Menu
Choose 1,2...

The following screen will appear:
Master Code
ENTER/NEXT/END
(Master Code)