Pima Hunter-Pro 32 - 4.3 Private Dialer Telephone Numbers

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
31
4.2 Programming Time and Date
Time and date are constantly displayed on screen, used for the User
Code’s time frames and are included in the system’s memory log.
It is crucial that the time and date remain accurate, especially for the
memory log, which is crucial for the technician visits.
 Master Code /Enabled User Code
User Menu
Choose 1,2...

-OR-
  User Code
…
User Menu
Choose 1,2...

The following screen will appear:
Hour
00:00
Time  …
Day Month Year
01 01 04
Date

NOTE:
 Enter time in 24:00 (HH:MM) format and date in day/month/year
format
 The system will not accept meaningless data, such as 25:25 time.
In such a case a fault message will appear. To correct, press the
key and enter time again.
4.3 Private Dialer Telephone
Numbers
HUNTER-PRO 32 system has four private dialer telephone numbers.
The dialer will dial each phone number in two sets (i.e. total of 8
attempts) and trigger an alarm warning sound, when the call is
‘picked’. After the warning sound is over, the system awaits for
remote-controlled commands that can be transmitted via the
telephone used by the system. The system shall hang-up after a