Pima Hunter-Pro 32 - 3.5 Disarming the System

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
19
3.4.2 Programming Auto-Arming after no-detection
period
 Master Code /Enabled User Code
User Menu
Choose 1,2...

-OR-
  User Code
User Menu
Choose 1,2...

In the following screen, enter the no-detection period (in minutes)
that after which the system commence auto-arming:
Silence Time
X Minutes
 Silence Time in minutes
Press to save programming and move to the next screen.
3.5 Disarming the System
3.5.1 Disarming the System with Master Code
 Master Code
User Menu
Choose 1,2...

3.5.2 Disarming the System with User Code
 User Code
Entering the code will immediately disarm the system.
-OR-
 Enabled User Code
User Menu
Choose 1,2...

-OR-