Pima Hunter-Pro 32 - Alarm

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
34
4.5 Alarm
There are two possibilities for displaying the name and number of
the zone/s that triggers the alarm at the time of an alarm. The
technician sets the default display.
 PIMA Display
All the zones and their status appear simultaneously in a single
screen (see section 2.2 “PIMA Display”). Example:
17
18
19
20
21
2
2
23
24 25 26 27 28 29 30 31 32
-- B - -
_
-A-F------
-- - - B ---
_
-S--S--
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
 Scrolling Display
The name and number of the zone/s that triggered the alarm will
appear separately, each in a different screen, in an automatic
successive manner. The display will repeat itself for a few minutes,
until it will return to the regular screen of an activated system.
In addition, the system will commence other actions according to the
zones’ programmed features at time of alarm, such as dialing private
telephone numbers, disabling siren (“silent alarm”), dialing
monitoring station and more. Example:
17
18
19
20
21
2
2
23
24 25 26 27 28 29 30 31 32
4
S E P 0 4 2 1 : 2 2
OP :
ZONE 7
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
NOTE:
The zone names are programmed only by the technician.